slide banner (1)

1)Positive Material Identification: PMI is used to analysis and identify material grade & alloy composition for quality control. A rapid NDE Method.

PMI is an on-site examination of security-relevant components in regards to the used material (especially in the field of metal structures). It’s on spot, non-destructive and verifies the compliance of the chemical composition of the materials used. Instead of relying on certificates of composition, regulation forces many plant operators to check all the materials used.

Positive Material Identification (PMI) testing has established itself as a solution for ensuring product quality, a safe manufacturing environment and quick results.

2)Remote Visual Inspection (RVI) : Remote Visual Inspection is rigid by Boroscope or Fibroscope . Boroscopes are mostly used in non-destructive testing techniques for recognizing defect or imperfection.

 Boroscopes are commonly used in the visual inspection of aircraft engines, aero-derivative, industrial gas turbines, steam turbines, diesel engines, automotive sector, inspection of large tanks & pressure vessels, sewer lines, gas & oil refinery pipeline inspection, boiler industries

service image6
service image2

3)Radiography Testing
Radiography testing  is a volumetric NDE method of Nondestructive examination  which is mainly used for detect defect or flaws in casting , welding, forging etc. Radiography is used to findout surface & subsurface defect.

4)Magnetic Particle Testing (MPT)

Magnetic Particle Testing is used to find out defect on surface and subsurface examination, In this method the Material should be Magnetic. This Method is intended to present information on the widely used method of magnetic particle inspection. Magnetic particle inspection can detect both production discontinuities (seams, laps, grinding cracks and quenching cracks) and in-service damages, (fatigue and overload cracks.)

service image8
service image7

5)Ultrasound Flow Detection (UFD/UT)

It is a volumetric NDE method in which beams of high frequency sound waves that are introduced into the material being tested are used to detect volumetric flow. The sound waves travel through the materials with some attenuation of energy and are reflected at interfaces. The reflected beam is detected and analyzed to define the presence and location of flaws. (Cracks, laminations, shrinkage, cavities, bursts, flakes, pores, bonding faults and other discontinuities that can act as metal-gas interfaces can be easily detected.)

6)e-LORA (e – Licensing of Radiation Applications)

Our organization provides e-LORA consultancy to our clients, we have professionals to handle all the e-LORA applications from scratch, In addition to that we provide guidance for industrial radiography in technical aspect.

slider image elora22
service image3

7) Ultrasonic Thickness Gauge (UTG)

In this method thickness is measured by ultrasonic pulse echo technique.

8)Dye-Penetrate Testing

This Method is mainly used for,to detect sheet or planer surface defects.

service image4

9)Leak Testing

leak test is a procedure used to determine if an object, product, or system functions within a specified leak limit.